GNU Classpath (0.99.1-pre) | |

Prev Class | Next Class | Frames | No Frames |

Summary: Nested | Field | Method | Constr | Detail: Nested | Field | Method | Constr |

`java.lang.Object`

`java.awt.geom.AffineTransform`

**Implemented Interfaces:**- Cloneable, Serializable

This class represents an affine transformation between two coordinate
spaces in 2 dimensions. Such a transform preserves the "straightness"
and "parallelness" of lines. The transform is built from a sequence of
translations, scales, flips, rotations, and shears.

The transformation can be represented using matrix math on a 3x3 array. Given (x,y), the transformation (x',y') can be found by:

[ x'] [ m00 m01 m02 ] [ x ] [ m00*x + m01*y + m02 ] [ y'] = [ m10 m11 m12 ] [ y ] = [ m10*x + m11*y + m12 ] [ 1 ] [ 0 0 1 ] [ 1 ] [ 1 ]The bottom row of the matrix is constant, so a transform can be uniquely represented (as in

`toString()`

) by
"[[m00, m01, m02], [m10, m11, m12]]".
**Since:**- 1.2

**See Also:**- Serialized Form

## Field Summary

`static int`

`TYPE_FLIP`

- The transformation includes a flip about an axis, swapping between right-handed and left-handed coordinate systems.

`static int`

`TYPE_GENERAL_ROTATION`

- The transformation includes a rotation by an arbitrary angle.

`static int`

`TYPE_GENERAL_SCALE`

- The transformation includes a general scale - length is scaled in either or both the x and y directions, but by different amounts; without affecting angles.

`static int`

`TYPE_GENERAL_TRANSFORM`

- The transformation is an arbitrary conversion of coordinates which could not be decomposed into the other TYPEs.

`static int`

`TYPE_IDENTITY`

- The transformation is the identity (x' = x, y' = y).

`static int`

`TYPE_MASK_ROTATION`

- This constant checks if either variety of rotation is performed.

`static int`

`TYPE_MASK_SCALE`

- This constant checks if either variety of scale transform is performed.

`static int`

`TYPE_QUADRANT_ROTATION`

- The transformation includes a rotation of a multiple of 90 degrees (PI/2 radians).

`static int`

`TYPE_TRANSLATION`

- The transformation includes a translation - shifting in the x or y direction without changing length or angles.

`static int`

`TYPE_UNIFORM_SCALE`

- The transformation includes a uniform scale - length is scaled in both the x and y directions by the same amount, without affecting angles.

## Constructor Summary

`AffineTransform()`

- Construct a new identity transform:
[ 1 0 0 ] [ 0 1 0 ] [ 0 0 1 ]

`AffineTransform(double m00, double m10, double m01, double m11, double m02, double m12)`

- Construct a transform with the given matrix entries:
[ m00 m01 m02 ] [ m10 m11 m12 ] [ 0 0 1 ]

`AffineTransform(double[] d)`

- Construct a transform from a sequence of double entries.

`AffineTransform(float m00, float m10, float m01, float m11, float m02, float m12)`

- Construct a transform with the given matrix entries:
[ m00 m01 m02 ] [ m10 m11 m12 ] [ 0 0 1 ]

`AffineTransform(float[] f)`

- Construct a transform from a sequence of float entries.

`AffineTransform(AffineTransform tx)`

- Create a new transform which copies the given one.

## Method Summary

`Object`

`clone()`

- Create a new transform of the same run-time type, with the same transforming properties as this one.

`void`

`concatenate(AffineTransform tx)`

- Set this transform to the result of performing the original version of this followed by tx.

`AffineTransform`

`createInverse()`

- Returns a transform, which if concatenated to this one, will result in the identity transform.

`Shape`

`createTransformedShape(Shape src)`

- Return a new Shape, based on the given one, where the path of the shape has been transformed by this transform.

`void`

`deltaTransform(double[] srcPts, int srcOff, double[] dstPts, int dstOff, int num)`

- Perform this transformation, less any translation, on an array of points, in (x,y) pairs, storing the results in another (possibly same) array.

`Point2D`

`deltaTransform(Point2D src, Point2D dst)`

- Perform this transformation, less any translation, on the given source point, and store the result in the destination (creating it if necessary).

`boolean`

`double`

`getDeterminant()`

- Return the determinant of this transform matrix.

`void`

`getMatrix(double[] d)`

- Return the matrix of values used in this transform.

`static AffineTransform`

`getRotateInstance(double theta)`

- Returns a rotation transform.

`static AffineTransform`

`getRotateInstance(double theta, double x, double y)`

- Returns a rotation transform about a point.

`static AffineTransform`

`getScaleInstance(double sx, double sy)`

- Returns a scaling transform:
[ sx 0 0 ] [ 0 sy 0 ] [ 0 0 1 ]

`double`

`getScaleX()`

- Returns the X coordinate scaling factor of the matrix.

`double`

`getScaleY()`

- Returns the Y coordinate scaling factor of the matrix.

`static AffineTransform`

`getShearInstance(double shx, double shy)`

- Returns a shearing transform (points are shifted in the x direction based
on a factor of their y coordinate, and in the y direction as a factor of
their x coordinate):
[ 1 shx 0 ] [ shy 1 0 ] [ 0 0 1 ]

`double`

`getShearX()`

- Returns the X coordinate shearing factor of the matrix.

`double`

`getShearY()`

- Returns the Y coordinate shearing factor of the matrix.

`static AffineTransform`

`getTranslateInstance(double tx, double ty)`

- Returns a translation transform:
[ 1 0 tx ] [ 0 1 ty ] [ 0 0 1 ]

`double`

`getTranslateX()`

- Returns the X coordinate translation factor of the matrix.

`double`

`getTranslateY()`

- Returns the Y coordinate translation factor of the matrix.

`int`

`getType()`

- Returns the type of this transform.

`int`

`hashCode()`

- Return the hashcode for this transformation.

`void`

`inverseTransform(double[] srcPts, int srcOff, double[] dstPts, int dstOff, int num)`

- Perform the inverse of this transformation on an array of points, in (x,y) pairs, storing the results in another (possibly same) array.

`Point2D`

`inverseTransform(Point2D src, Point2D dst)`

- Perform the inverse of this transformation on the given source point, and store the result in the destination (creating it if necessary).

`boolean`

`isIdentity()`

- Tests if this transformation is the identity:
[ 1 0 0 ] [ 0 1 0 ] [ 0 0 1 ]

`void`

`preConcatenate(AffineTransform tx)`

- Set this transform to the result of performing tx followed by the original version of this.

`void`

`rotate(double theta)`

- Concatenate a rotation onto this transform.

`void`

`rotate(double theta, double x, double y)`

- Concatenate a rotation about a point onto this transform.

`void`

`scale(double sx, double sy)`

- Concatenate a scale onto this transform.

`void`

`setToIdentity()`

- Reset this transform to the identity (no transformation):
[ 1 0 0 ] [ 0 1 0 ] [ 0 0 1 ]

`void`

`setToRotation(double theta)`

- Set this transform to a rotation.

`void`

`setToRotation(double theta, double x, double y)`

- Set this transform to a rotation about a point.

`void`

`setToScale(double sx, double sy)`

- Set this transform to a scale:
[ sx 0 0 ] [ 0 sy 0 ] [ 0 0 1 ]

`void`

`setToShear(double shx, double shy)`

- Set this transform to a shear (points are shifted in the x direction based
on a factor of their y coordinate, and in the y direction as a factor of
their x coordinate):
[ 1 shx 0 ] [ shy 1 0 ] [ 0 0 1 ]

`void`

`setToTranslation(double tx, double ty)`

- Set this transform to a translation:
[ 1 0 tx ] [ 0 1 ty ] [ 0 0 1 ]

`void`

`setTransform(double m00, double m10, double m01, double m11, double m02, double m12)`

- Set this transform to the given values:
[ m00 m01 m02 ] [ m10 m11 m12 ] [ 0 0 1 ]

`void`

`setTransform(AffineTransform tx)`

- Set this transform to a copy of the given one.

`void`

`shear(double shx, double shy)`

- Concatenate a shearing onto this transform.

`String`

`toString()`

- Returns a string representation of the transform, in the format:
`"AffineTransform[[" + m00 + ", " + m01 + ", " + m02 + "], [" + m10 + ", " + m11 + ", " + m12 + "]]"`

.

`void`

`transform(double[] srcPts, int srcOff, double[] dstPts, int dstOff, int num)`

- Perform this transformation on an array of points, in (x,y) pairs, storing the results in another (possibly same) array.

`void`

`transform(double[] srcPts, int srcOff, float[] dstPts, int dstOff, int num)`

- Perform this transformation on an array of points, in (x,y) pairs, storing the results in another array.

`void`

`transform(float[] srcPts, int srcOff, double[] dstPts, int dstOff, int num)`

- Perform this transformation on an array of points, in (x,y) pairs, storing the results in another array.

`void`

`transform(float[] srcPts, int srcOff, float[] dstPts, int dstOff, int num)`

- Perform this transformation on an array of points, in (x,y) pairs, storing the results in another (possibly same) array.

`Point2D`

`void`

`void`

`translate(double tx, double ty)`

- Concatenate a translation onto this transform.

### Methods inherited from class java.lang.Object

`clone`

,`equals`

,`extends Object> getClass`

,`finalize`

,`hashCode`

,`notify`

,`notifyAll`

,`toString`

,`wait`

,`wait`

,`wait`

public static final int TYPE_FLIP

The transformation includes a flip about an axis, swapping between right-handed and left-handed coordinate systems. In a right-handed system, the positive x-axis rotates counter-clockwise to the positive y-axis; in a left-handed system it rotates clockwise.

Field Value:- 64

public static final int TYPE_GENERAL_ROTATION

The transformation includes a rotation by an arbitrary angle. Angles are rotated, but length is preserved. This is mutually exclusive with TYPE_QUADRANT_ROTATION.

Field Value:- 16

public static final int TYPE_GENERAL_SCALE

The transformation includes a general scale - length is scaled in either or both the x and y directions, but by different amounts; without affecting angles. This is mutually exclusive with TYPE_UNIFORM_SCALE.

Field Value:- 4

public static final int TYPE_GENERAL_TRANSFORM

The transformation is an arbitrary conversion of coordinates which could not be decomposed into the other TYPEs.

Field Value:- 32

public static final int TYPE_IDENTITY

The transformation is the identity (x' = x, y' = y). All other transforms have either a combination of the appropriate transform flag bits for their type, or the type GENERAL_TRANSFORM.

Field Value:- 0

public static final int TYPE_MASK_ROTATION

This constant checks if either variety of rotation is performed.

Field Value:- 24

See Also:`TYPE_QUADRANT_ROTATION`

,`TYPE_GENERAL_ROTATION`

public static final int TYPE_MASK_SCALE

This constant checks if either variety of scale transform is performed.

Field Value:- 6

See Also:`TYPE_UNIFORM_SCALE`

,`TYPE_GENERAL_SCALE`

public static final int TYPE_QUADRANT_ROTATION

The transformation includes a rotation of a multiple of 90 degrees (PI/2 radians). Angles are rotated, but length is preserved. This is mutually exclusive with TYPE_GENERAL_ROTATION.

Field Value:- 8

public static final int TYPE_TRANSLATION

The transformation includes a translation - shifting in the x or y direction without changing length or angles.

Field Value:- 1

public static final int TYPE_UNIFORM_SCALE

The transformation includes a uniform scale - length is scaled in both the x and y directions by the same amount, without affecting angles. This is mutually exclusive with TYPE_GENERAL_SCALE.

Field Value:- 2

public AffineTransform()

Construct a new identity transform:[ 1 0 0 ] [ 0 1 0 ] [ 0 0 1 ]

public AffineTransform(double m00, double m10, double m01, double m11, double m02, double m12)

Construct a transform with the given matrix entries:[ m00 m01 m02 ] [ m10 m11 m12 ] [ 0 0 1 ]

Parameters:`m00`

- the x scaling component`m10`

- the y shearing component`m01`

- the x shearing component`m11`

- the y scaling component`m02`

- the x translation component`m12`

- the y translation component

public AffineTransform(double[] d)

Construct a transform from a sequence of double entries. The array must have at least 4 entries, which has a translation factor of 0; or 6 entries, for specifying all parameters:[ d[0] d[2] (d[4]) ] [ d[1] d[3] (d[5]) ] [ 0 0 1 ]

Parameters:`d`

- the matrix to copy from, with at least 4 (6) entries

Throws:`NullPointerException`

- if d is null`ArrayIndexOutOfBoundsException`

- if d is too small

public AffineTransform(float m00, float m10, float m01, float m11, float m02, float m12)

Construct a transform with the given matrix entries:[ m00 m01 m02 ] [ m10 m11 m12 ] [ 0 0 1 ]

Parameters:`m00`

- the x scaling component`m10`

- the y shearing component`m01`

- the x shearing component`m11`

- the y scaling component`m02`

- the x translation component`m12`

- the y translation component

public AffineTransform(float[] f)

Construct a transform from a sequence of float entries. The array must have at least 4 entries, which has a translation factor of 0; or 6 entries, for specifying all parameters:[ f[0] f[2] (f[4]) ] [ f[1] f[3] (f[5]) ] [ 0 0 1 ]

Parameters:`f`

- the matrix to copy from, with at least 4 (6) entries

Throws:`NullPointerException`

- if f is null`ArrayIndexOutOfBoundsException`

- if f is too small

public AffineTransform(AffineTransform tx)

Create a new transform which copies the given one.

Parameters:`tx`

- the transform to copy

Throws:`NullPointerException`

- if tx is null

public Object clone()

Create a new transform of the same run-time type, with the same transforming properties as this one.

Returns:- the clone

public void concatenate(AffineTransform tx)

Set this transform to the result of performing the original version of this followed by tx. This is commonly used when chaining transformations from one space to another. In matrix form:[ this ] = [ this ] x [ tx ]

Parameters:`tx`

- the transform to concatenate

Throws:`NullPointerException`

- if tx is null

See Also:`preConcatenate(AffineTransform)`

public AffineTransform createInverse() throws NoninvertibleTransformException

Returns a transform, which if concatenated to this one, will result in the identity transform. This is useful for undoing transformations, but is only possible if the original transform has an inverse (ie. does not map multiple points to the same line or point). A transform exists only if getDeterminant() has a non-zero value. The inverse is calculated as:Let A be the matrix for which we want to find the inverse: A = [ m00 m01 m02 ] [ m10 m11 m12 ] [ 0 0 1 ] 1 inverse (A) = --- x adjoint(A) det = 1 [ m11 -m01 m01*m12-m02*m11 ] --- x [ -m10 m00 -m00*m12+m10*m02 ] det [ 0 0 m00*m11-m10*m01 ] = [ m11/det -m01/det m01*m12-m02*m11/det ] [ -m10/det m00/det -m00*m12+m10*m02/det ] [ 0 0 1 ]

Returns:- a new inverse transform

Throws:`NoninvertibleTransformException`

- if inversion is not possible

See Also:`getDeterminant()`

public Shape createTransformedShape(Shape src)

Return a new Shape, based on the given one, where the path of the shape has been transformed by this transform. Notice that this uses GeneralPath, which only stores points in float precision.

Parameters:`src`

- the shape source to transform

Returns:- the shape, transformed by this,
`null`

if src is`null`

.

public void deltaTransform(double[] srcPts, int srcOff, double[] dstPts, int dstOff, int num)

Perform this transformation, less any translation, on an array of points, in (x,y) pairs, storing the results in another (possibly same) array. This will not create a destination array. All sources are copied before the transformation, so that no result will overwrite a point that has not yet been evaluated. The reduced transform is equivalent to:[ x' ] = [ m00 m01 ] [ x ] = [ m00 * x + m01 * y ] [ y' ] [ m10 m11 ] [ y ] = [ m10 * x + m11 * y ]

Parameters:`srcPts`

- the array of source points`srcOff`

- the starting offset into src`dstPts`

- the array of destination points`dstOff`

- the starting offset into dst`num`

- the number of points to transform

Throws:`NullPointerException`

- if src or dst is null`ArrayIndexOutOfBoundsException`

- if array bounds are exceeded

public Point2D deltaTransform(Point2D src, Point2D dst)

Perform this transformation, less any translation, on the given source point, and store the result in the destination (creating it if necessary). It is safe for src and dst to be the same. The reduced transform is equivalent to:[ x' ] = [ m00 m01 ] [ x ] = [ m00 * x + m01 * y ] [ y' ] [ m10 m11 ] [ y ] = [ m10 * x + m11 * y ]

Parameters:`src`

- the source point`dst`

- the destination, or null

Returns:- the delta transformation of src, in dst if it was non-null

Throws:`NullPointerException`

- if src is null

public boolean equals(Object obj)

Compares two transforms for equality. This returns true if they have the same matrix values.

Parameters:`obj`

- the transform to compare

Returns:- true if it is equal

public double getDeterminant()

Return the determinant of this transform matrix. If the determinant is non-zero, the transform is invertible; otherwise operations which require an inverse throw a NoninvertibleTransformException. A result very near zero, due to rounding errors, may indicate that inversion results do not carry enough precision to be meaningful.If this is a uniform scale transformation, the determinant also represents the squared value of the scale. Otherwise, it carries little additional meaning. The determinant is calculated as:

| m00 m01 m02 | | m10 m11 m12 | = m00 * m11 - m01 * m10 | 0 0 1 |

Returns:- the determinant

See Also:`createInverse()`

public void getMatrix(double[] d)

Return the matrix of values used in this transform. If the matrix has fewer than 6 entries, only the scale and shear factors are returned; otherwise the translation factors are copied as well. The resulting values are:[ d[0] d[2] (d[4]) ] [ d[1] d[3] (d[5]) ] [ 0 0 1 ]

Parameters:`d`

- the matrix to store the results into; with 4 (6) entries

Throws:`NullPointerException`

- if d is null`ArrayIndexOutOfBoundsException`

- if d is too small

public static AffineTransform getRotateInstance(double theta)

Returns a rotation transform. A positive angle (in radians) rotates the positive x-axis to the positive y-axis:[ cos(theta) -sin(theta) 0 ] [ sin(theta) cos(theta) 0 ] [ 0 0 1 ]

Parameters:`theta`

- the rotation angle

Returns:- the rotating transform

public static AffineTransform getRotateInstance(double theta, double x, double y)

Returns a rotation transform about a point. A positive angle (in radians) rotates the positive x-axis to the positive y-axis. This is the same as calling:AffineTransform tx = new AffineTransform(); tx.setToTranslation(x, y); tx.rotate(theta); tx.translate(-x, -y);The resulting matrix is:

[ cos(theta) -sin(theta) x-x*cos+y*sin ] [ sin(theta) cos(theta) y-x*sin-y*cos ] [ 0 0 1 ]

Parameters:`theta`

- the rotation angle`x`

- the x coordinate of the pivot point`y`

- the y coordinate of the pivot point

Returns:- the rotating transform

public static AffineTransform getScaleInstance(double sx, double sy)

Returns a scaling transform:[ sx 0 0 ] [ 0 sy 0 ] [ 0 0 1 ]

Parameters:`sx`

- the x scaling factor`sy`

- the y scaling factor

Returns:- the scaling transform

public double getScaleX()

Returns the X coordinate scaling factor of the matrix.

Returns:- m00

See Also:`getMatrix(double[])`

public double getScaleY()

Returns the Y coordinate scaling factor of the matrix.

Returns:- m11

See Also:`getMatrix(double[])`

public static AffineTransform getShearInstance(double shx, double shy)

Returns a shearing transform (points are shifted in the x direction based on a factor of their y coordinate, and in the y direction as a factor of their x coordinate):[ 1 shx 0 ] [ shy 1 0 ] [ 0 0 1 ]

Parameters:`shx`

- the x shearing factor`shy`

- the y shearing factor

Returns:- the shearing transform

public double getShearX()

Returns the X coordinate shearing factor of the matrix.

Returns:- m01

See Also:`getMatrix(double[])`

public double getShearY()

Returns the Y coordinate shearing factor of the matrix.

Returns:- m10

See Also:`getMatrix(double[])`

public static AffineTransform getTranslateInstance(double tx, double ty)

Returns a translation transform:[ 1 0 tx ] [ 0 1 ty ] [ 0 0 1 ]

Parameters:`tx`

- the x translation distance`ty`

- the y translation distance

Returns:- the translating transform

public double getTranslateX()

Returns the X coordinate translation factor of the matrix.

Returns:- m02

See Also:`getMatrix(double[])`

public double getTranslateY()

Returns the Y coordinate translation factor of the matrix.

Returns:- m12

See Also:`getMatrix(double[])`

public int getType()

Returns the type of this transform. The result is always valid, although it may not be the simplest interpretation (in other words, there are sequences of transforms which reduce to something simpler, which this does not always detect). The result is either TYPE_GENERAL_TRANSFORM, or a bit-wise combination of TYPE_TRANSLATION, the mutually exclusive TYPE_*_ROTATIONs, and the mutually exclusive TYPE_*_SCALEs.

Returns:- The type.

public int hashCode()

Return the hashcode for this transformation. The formula is not documented, but appears to be the same as:long l = Double.doubleToLongBits(getScaleX()); l = l * 31 + Double.doubleToLongBits(getShearX()); l = l * 31 + Double.doubleToLongBits(getTranslateX()); l = l * 31 + Double.doubleToLongBits(getShearY()); l = l * 31 + Double.doubleToLongBits(getScaleY()); l = l * 31 + Double.doubleToLongBits(getTranslateY()); return (int) ((l >> 32) ^ l);

Returns:- the hashcode

public void inverseTransform(double[] srcPts, int srcOff, double[] dstPts, int dstOff, int num) throws NoninvertibleTransformException

Perform the inverse of this transformation on an array of points, in (x,y) pairs, storing the results in another (possibly same) array. This will not create a destination array. All sources are copied before the transformation, so that no result will overwrite a point that has not yet been evaluated.

Parameters:`srcPts`

- the array of source points`srcOff`

- the starting offset into src`dstPts`

- the array of destination points`dstOff`

- the starting offset into dst`num`

- the number of points to transform

Throws:`NullPointerException`

- if src or dst is null`ArrayIndexOutOfBoundsException`

- if array bounds are exceeded`NoninvertibleTransformException`

- if the inverse does not exist

See Also:`getDeterminant()`

public Point2D inverseTransform(Point2D src, Point2D dst) throws NoninvertibleTransformException

Perform the inverse of this transformation on the given source point, and store the result in the destination (creating it if necessary). It is safe for src and dst to be the same.

Parameters:`src`

- the source point`dst`

- the destination, or null

Returns:- the inverse transformation of src, in dst if it was non-null

Throws:`NullPointerException`

- if src is null`NoninvertibleTransformException`

- if the inverse does not exist

See Also:`getDeterminant()`

public boolean isIdentity()

Tests if this transformation is the identity:[ 1 0 0 ] [ 0 1 0 ] [ 0 0 1 ]

Returns:- true if this is the identity transform

public void preConcatenate(AffineTransform tx)

Set this transform to the result of performing tx followed by the original version of this. This is less common than normal concatenation, but can still be used to chain transformations from one space to another. In matrix form:[ this ] = [ tx ] x [ this ]

Parameters:`tx`

- the transform to concatenate

Throws:`NullPointerException`

- if tx is null

See Also:`concatenate(AffineTransform)`

public void rotate(double theta)

Concatenate a rotation onto this transform. This is equivalent, but more efficient than`concatenate(AffineTransform.getRotateInstance(theta))`

.

Parameters:`theta`

- the rotation angle

public void rotate(double theta, double x, double y)

Concatenate a rotation about a point onto this transform. This is equivalent, but more efficient than`concatenate(AffineTransform.getRotateInstance(theta, x, y))`

.

Parameters:`theta`

- the rotation angle`x`

- the x coordinate of the pivot point`y`

- the y coordinate of the pivot point

public void scale(double sx, double sy)

Concatenate a scale onto this transform. This is equivalent, but more efficient than`concatenate(AffineTransform.getScaleInstance(sx, sy))`

.

Parameters:`sx`

- the x scaling factor`sy`

- the y scaling factor

public void setToIdentity()

Reset this transform to the identity (no transformation):[ 1 0 0 ] [ 0 1 0 ] [ 0 0 1 ]

public void setToRotation(double theta)

Set this transform to a rotation. A positive angle (in radians) rotates the positive x-axis to the positive y-axis:[ cos(theta) -sin(theta) 0 ] [ sin(theta) cos(theta) 0 ] [ 0 0 1 ]

Parameters:`theta`

- the rotation angle

public void setToRotation(double theta, double x, double y)

Set this transform to a rotation about a point. A positive angle (in radians) rotates the positive x-axis to the positive y-axis. This is the same as calling:tx.setToTranslation(x, y); tx.rotate(theta); tx.translate(-x, -y);The resulting matrix is:

[ cos(theta) -sin(theta) x-x*cos+y*sin ] [ sin(theta) cos(theta) y-x*sin-y*cos ] [ 0 0 1 ]

Parameters:`theta`

- the rotation angle`x`

- the x coordinate of the pivot point`y`

- the y coordinate of the pivot point

public void setToScale(double sx, double sy)

Set this transform to a scale:[ sx 0 0 ] [ 0 sy 0 ] [ 0 0 1 ]

Parameters:`sx`

- the x scaling factor`sy`

- the y scaling factor

public void setToShear(double shx, double shy)

Set this transform to a shear (points are shifted in the x direction based on a factor of their y coordinate, and in the y direction as a factor of their x coordinate):[ 1 shx 0 ] [ shy 1 0 ] [ 0 0 1 ]

Parameters:`shx`

- the x shearing factor`shy`

- the y shearing factor

public void setToTranslation(double tx, double ty)

Set this transform to a translation:[ 1 0 tx ] [ 0 1 ty ] [ 0 0 1 ]

Parameters:`tx`

- the x translation distance`ty`

- the y translation distance

public void setTransform(double m00, double m10, double m01, double m11, double m02, double m12)

Set this transform to the given values:[ m00 m01 m02 ] [ m10 m11 m12 ] [ 0 0 1 ]

Parameters:`m00`

- the x scaling component`m10`

- the y shearing component`m01`

- the x shearing component`m11`

- the y scaling component`m02`

- the x translation component`m12`

- the y translation component

public void setTransform(AffineTransform tx)

Set this transform to a copy of the given one.

Parameters:`tx`

- the transform to copy

Throws:`NullPointerException`

- if tx is null

public void shear(double shx, double shy)

Concatenate a shearing onto this transform. This is equivalent, but more efficient than`concatenate(AffineTransform.getShearInstance(sx, sy))`

.

Parameters:`shx`

- the x shearing factor`shy`

- the y shearing factor

public String toString()

Returns a string representation of the transform, in the format:`"AffineTransform[[" + m00 + ", " + m01 + ", " + m02 + "], [" + m10 + ", " + m11 + ", " + m12 + "]]"`

.

Returns:- the string representation

public void transform(double[] srcPts, int srcOff, double[] dstPts, int dstOff, int num)

Perform this transformation on an array of points, in (x,y) pairs, storing the results in another (possibly same) array. This will not create a destination array. All sources are copied before the transformation, so that no result will overwrite a point that has not yet been evaluated.

Parameters:`srcPts`

- the array of source points`srcOff`

- the starting offset into src`dstPts`

- the array of destination points`dstOff`

- the starting offset into dst`num`

- the number of points to transform

Throws:`NullPointerException`

- if src or dst is null`ArrayIndexOutOfBoundsException`

- if array bounds are exceeded

public void transform(double[] srcPts, int srcOff, float[] dstPts, int dstOff, int num)

Perform this transformation on an array of points, in (x,y) pairs, storing the results in another array. This will not create a destination array.

Parameters:`srcPts`

- the array of source points`srcOff`

- the starting offset into src`dstPts`

- the array of destination points`dstOff`

- the starting offset into dst`num`

- the number of points to transform

Throws:`NullPointerException`

- if src or dst is null`ArrayIndexOutOfBoundsException`

- if array bounds are exceeded

public void transform(float[] srcPts, int srcOff, double[] dstPts, int dstOff, int num)

Perform this transformation on an array of points, in (x,y) pairs, storing the results in another array. This will not create a destination array.

Parameters:`srcPts`

- the array of source points`srcOff`

- the starting offset into src`dstPts`

- the array of destination points`dstOff`

- the starting offset into dst`num`

- the number of points to transform

Throws:`NullPointerException`

- if src or dst is null`ArrayIndexOutOfBoundsException`

- if array bounds are exceeded

public void transform(float[] srcPts, int srcOff, float[] dstPts, int dstOff, int num)

Perform this transformation on an array of points, in (x,y) pairs, storing the results in another (possibly same) array. This will not create a destination array. All sources are copied before the transformation, so that no result will overwrite a point that has not yet been evaluated.

Parameters:`srcPts`

- the array of source points`srcOff`

- the starting offset into src`dstPts`

- the array of destination points`dstOff`

- the starting offset into dst`num`

- the number of points to transform

Throws:`NullPointerException`

- if src or dst is null`ArrayIndexOutOfBoundsException`

- if array bounds are exceeded

public Point2D transform(Point2D src, Point2D dst)

Perform this transformation on the given source point, and store the result in the destination (creating it if necessary). It is safe for src and dst to be the same.

Parameters:`src`

- the source point`dst`

- the destination, or null

Returns:- the transformation of src, in dst if it was non-null

Throws:`NullPointerException`

- if src is null

public void transform(Point2D[] src, int srcOff, Point2D[] dst, int dstOff, int num)

Perform this transformation on an array of points, storing the results in another (possibly same) array. This will not create a destination array, but will create points for the null entries of the destination. The transformation is done sequentially. While having a single source and destination point be the same is safe, you should be aware that duplicate references to the same point in the source, and having the source overlap the destination, may result in your source points changing from a previous transform before it is their turn to be evaluated.

Parameters:`src`

- the array of source points`srcOff`

- the starting offset into src`dst`

- the array of destination points (may have null entries)`dstOff`

- the starting offset into dst`num`

- the number of points to transform

Throws:`NullPointerException`

- if src or dst is null, or src has null entries`ArrayIndexOutOfBoundsException`

- if array bounds are exceeded`ArrayStoreException`

- if new points are incompatible with dst

public void translate(double tx, double ty)

Concatenate a translation onto this transform. This is equivalent, but more efficient than`concatenate(AffineTransform.getTranslateInstance(tx, ty))`

.

Parameters:`tx`

- the x translation distance`ty`

- the y translation distance

AffineTransform.java -- transform coordinates between two 2-D spaces
Copyright (C) 2000, 2001, 2002, 2004 Free Software Foundation
This file is part of GNU Classpath.
GNU Classpath is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
GNU Classpath is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License
along with GNU Classpath; see the file COPYING. If not, write to the
Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
02110-1301 USA.
Linking this library statically or dynamically with other modules is
making a combined work based on this library. Thus, the terms and
conditions of the GNU General Public License cover the whole
combination.
As a special exception, the copyright holders of this library give you
permission to link this library with independent modules to produce an
executable, regardless of the license terms of these independent
modules, and to copy and distribute the resulting executable under
terms of your choice, provided that you also meet, for each linked
independent module, the terms and conditions of the license of that
module. An independent module is a module which is not derived from
or based on this library. If you modify this library, you may extend
this exception to your version of the library, but you are not
obligated to do so. If you do not wish to do so, delete this
exception statement from your version.

GNU Classpath (0.99.1-pre) |